Greatest Water Treatment Available?

If you have an HVAC system that is in your home, or if you have a large one installed at a factory, the way that everything is cool down is using a cooling tower, and some problems are inherent with this type of setup. The purpose of the tower is to remove all of the heat that is produced every time the motors are running. They can also be used to cool the compressor refrigerant, but they are most well-known for removing the compressor heat itself. The process is called latent heat of vaporization, and it is possible for a single pound of water to remove 1000 BTUs of heat. However, some problems will show up on these particular cooling systems, beginning with the cycles of concentration.

What Are The Cycles Of Concentration

This only refers to the amount of solid particulate matter that happens to be in the water in comparison to water that has not been used or is not contaminated. The higher the number, the more likely it is that the cooling tower can be compromised by everything that accumulates in the water that is being used. This is why water treatment for a cooling tower is so necessary because it can blow over the contaminated water that is continuously recirculated. This can also include biological contaminants, and if left unchecked, it can inhibit proper heat transfer, and lead to the corrosion of the tubes that are used to extract the heat, leading to the possibility that the entire system will be compromised.

4 Most Common Problems And Solutions

The most common problems that are associated with the water in the cooling towers include scale, bacteria, corrosion and what is called biofilm. Level represents the amount of solid particulate matter in the water which contains inorganic salts which can severely restrict heat exchange. Biofilm refers to microorganisms that can also be deposited internally on the metal surfaces of the tubes. That is why chlorine or broke mine is used to improve these problems, along with chlorine dioxide gas. Bacteria, and other common problem can be easily removed using these solutions. Corrosion typically occurs in the form of what is called white rust, the corrosion of the metal due to microorganisms that can produce hydrogen sulfide and sulfuric acid, both of which can eat away at the metal.

As long as you are using galvanized steel for the water tower, you shouldn’t have any problems with white rust caused by bacteria. Additionally, corrosion will be eliminated, along with most biofilm-related problems, or degradation equipment. It is always good to have a tower water treatment from time to time that can extend the life of your unit. Regardless of size, it is imperative that you address all four of these potential issues with the aid of a professional water tower treatment specialist that can actually extend the life of your water tower for many years.

Leave a Reply

Your email address will not be published. Required fields are marked *